RO Controller (Reverse Osmosis Controller) microcontroller based panels are ideally suited for small and medium sized RO plants as they have the complete operating logic pre-programmed. The panels basically can take 6 inputs from the three devices namely low pressure switch (LPS), High pressure switch (HPS), RAW tank level switch (LS) conductivity and control the 4 outputs Raw water pump (RWP), High Pressure Pump (HPP), the flushing solenoid valve, ALARM. The advanced electronics also takes care of required motor protection such as over load, dry running and single phasing. It is designed to control and monitor the operating parameters of a reverse osmosis water purification system.

• When Overhead Tank is Empty and Underground Tank Is minimum FULL. Our device turns ON pump automatically.
• When Overhead Tank is FULL OR Underground Tank Is EMPTY.

• Four Water Level Indication +Alarm When Tank is filling , Water Level increases and LAMPs keep glowing one-by-one as 25%, 50%, 75% & 100%,
• When water level reaches 100% OR 25% alarm turns on .
• Acknowledge switch is provided to turn off the alarm.

• Four Water Level Indication +Alarm When Tank is filling , Water Level increases and LED keep glowing one-by-one as 25%, 50%, 75% & 100%,
• When water level reaches 100% OR 25% alarm turns on .
• Acknowledge switch is provided to turn off the alarm.